Home General The Best Way to Load and Unload Your New Dishwasher

The Best Way to Load and Unload Your New Dishwasher

Source: architecturaldigest.com

While a dishwasher may be a great investment, imagine if it cannot do its one job. For example, what if your dishes are not cleaned properly and look dull or have stains on them? While there could be various reasons for your dishes not getting cleaned properly, sometimes, the solution to this problem is quite simple – just loading and unloading the machine correctly.

Your dishwasher’s primary purpose is to take care of your dishes and make your life a little easy. You can research different brands and models to get a fully integrated dishwasher for your home.

Tips for Loading a Dishwasher

Source: megafurniture.sg

Below are tips for loading a dishwasher correctly:

Understand What You Can and Cannot Put in the Dishwasher.

Before you run your dishwasher, you must ensure it is filled with dishwasher-safe items. While it is a good practice to check the specific product before tossing it in the machine, there is certain cookware that should never be put in a dishwasher. For instance, your chinaware and porcelain, hand-painted dishware, cup and bowls, acrylic trays, cast iron cookware, wood cutting boards, and sharp knives should never be loaded in a dishwasher.

Know Where Every Utensil Should be Placed

Make sure you put all your utensils in the right racks. Your plates, pans, pots, and other large utensils should go in the bottom rack. The upper rack should have your cups, mugs, glasses, small bowls, and dishwasher-safe plastics.

Ensure You Don’t Keep All Silverware Together

Source: newyorker.com

The silverware is usually loaded in the utensils basket. You must place the spoons and forks with their handle downwards and the knives with their handles up. Avoid putting long spatulas and serving spoons in the cutlery container, as their height can block the water spray. You can keep the items on the upper rack if your dishwasher has no silverware basket. Remember to distribute knives, forks, and spoons throughout the designated compartments.

Start Loading the Dishwasher from Behind

Most of the time, you will not have to pre-rinse the dishes before loading them in the machine, especially if your machine is less than ten years old. You must, however, wipe away large chunks of food. The instructions for loading the dishes can change depending on the brand and type of dishwasher you have. First, ensure you scrape all the solid waste into the trash and then place the dishes in the machine. Once the food is removed, load the bottom and top racks from behind. Loading the washer from behind and adding utensils in the front uses the space efficiently. Next, place the platters and trays towards the side of the dishwasher so that they don’t block the arms that spray the water. Finally, you can put the large items and plates in the center.

Know Your Dishwasher’s Cleaning Agent Well

Source: bestinsingapore.com

After loading the machine, add the detergent and run the machine. You must use the right cleaning agent. Based on your make and model, you can choose from dishwasher liquids, tablets, or powder detergent.

Choose the Right Wash Cycle

Once you have loaded all your utensils, you must program the wash cycle. Pick the settings that are ideal for your dishwasher content and dirtiness levels. You can even delay the start time in some machines to ensure it runs during off-peak energy hours.

Tips for Unloading a Dishwasher

Source: megafurniture.sg

Below are tips for unloading the dishwasher:

Begin with the Bottom Rack

The water that gets collected on the utensils in the top rack may trickle onto the utensils in the lower rack. So, start by unloading the bottom rack first and then move to the top one. Begin by removing the larger vessels and dry them quickly if they still feel a little wet. Once the bottom rack is done, take the utensils basket out and remove the items.

Unload the Top Rack

The items in your top rack will likely be covered in water droplets. These are mostly plastic items and other items close to each other. Keep a clean dish towel close by when you unload the top rack.

A correctly loaded dishwasher is sure to perform well. In addition, a well-maintained and clean dishwasher will ensure your utensils sparkle after every wash cycle. Now that you know how to load and unload a dishwasher correctly, you can purchase one for your home. The Appliance Guys Sydney offers a wide range of dishwashers that you can choose from. In addition, they offer hassle-free deliveries and expert installations and removals. So what are you waiting for? Get your dishwasher today!